| 1. Cabin floor |
| 2. Cabin floor |
| 3. Bulkheads |
| 4. Bulkheads |
| 5. Side beams |
| 6. Side beams |
| 7. Forward and rear decks |
| 8. Completed centre section |
| 9. Side decks |
| 10. Cabin |
| 11. Lift duct |
 |
| Bulkheads. |
| Home | AP1-88/80 | AP1-88/100 | CC5 | Finger Trouble | Griffon2000TD | Griffon8100TD | SR.N2 | SR.N4 | SR.N5 | SR.N6 | SR.N6 Mk6 | BH.7 | SEDAM N300 |
Cut out four bulkheads (B). Cut the 6mm square balsa strip as shown in the drawing and glue to one side of each bulkhead (B) with PVA and leave to dry. When dry, turn each part (B) over and repeat on the other side.
|
|