| 1. Cabin floor |
| 2. Cabin floor |
| 3. Bulkheads |
| 4. Bulkheads |
| 5. Side beams |
| 6. Side beams |
| 7. Forward and rear decks |
| 8. Completed centre section |
| 9. Side decks |
| 10. Cabin |
| 11. Lift duct |
 |
| Bulkheads. |
| Home | AP1-88/80 | AP1-88/100 | CC5 | Finger Trouble | Griffon2000TD | Griffon8100TD | SR.N2 | SR.N4 | SR.N5 | SR.N6 | SR.N6 Mk6 | BH.7 - 1:32 | BH.7 - 1:16 | SEDAM N300 |
Lay the cabin floor (A) on a flat surface. Glue the four bulkheads (B) to the cabin floor (A) with PVA and pin in place. The bulkheads stand on the four dashed lines across the cabin floor (A). Prop up the bulkheads while the glue dries. Remove the pins when the glue is dry.
|
|