| 1. Cabin floor |
| 2. Cabin floor |
| 3. Bulkheads |
| 4. Bulkheads |
| 5. Side beams |
| 6. Side beams |
| 7. Forward and rear decks |
| 8. Completed centre section |
| 9. Side decks |
| 10. Cabin |
| 11. Lift duct |
 |
| Forward and rear decks. |
| Home | AP1-88/80 | AP1-88/100 | CC5 | Finger Trouble | Griffon2000TD | Griffon8100TD | SR.N2 | SR.N4 | SR.N5 | SR.N6 | SR.N6 Mk6 | BH.7 | SEDAM N300 |
Cut out the rear deck (E). Cut the 6mm square balsa strip as shown in the drawing and glue to one side of each deck with PVA and leave to dry. When dry, glue in place on the top of the hull with PVA.
|
|